kitchen design and extension
floplasts underground drainage system, withits painteted flexible inlet inspection chamber and bend, reduces fitting time and can evensave on materials. compatible with all plastic systems, it'ssimple to install, even for a complete novice. dig your trench to the british standards andbuilding regulations. to ensure the pipe is supported correctly,drop in pea shingle to form the pipe bed. pan out where all the major fittings willsit. ensure the inspection chamber is aligned sothe flow of water is maintained through the main channel to minimise any potential blockages. floplast inspection chambers have unique 10degree flexible joints, which makes fitting
quicker and easier.if fitting to a vertical soil and ventilation pipe, it's important to place a solid supportunder the long radius rest bend. measure and cut the length of pipe that joinsthe rest bend to the first inspection chamber. ensure all cut lengths of pipe are shell proofto roughly a 45 degree angle. join the first piece of pipe using a sprayor gel silicone lubricant on the seal to ease fitting. repeat the previous procedure for all theremaining fittings. traps, muffle gullies and other availablefittings can be added to the system. soil and ventilation pipes connect straightinto the long radius bend.
rain water down pipes connect to the systemvia a universal rain water adapter. mini access chambers can be added up to amaximum height of 600mm. large inspection chambers can be up to 1.2min height with the standard 450mm frame and lid, and up to 3m using a 350mm reduced accessframe and lid. to complete the installation of inspectionchambers, add rises to the required depth. backfill with pea shingle up to the crownof the pipe work and then backfill using the dugout soil. a wide range of fittings are available.
for more product info visit www.floplast.co.uk